RH-Series
SINGLE POLE ROCKER SWITCHES UP TO 30A 125/250VAC
, 128A INRUSH
illuminated or non-lighted, round or square LED lighted
 

Two positions:
  • 20A 125VAC (cURus)
  • 16A 125/250VAC(cURus)
  • 16(4)A 250V~ T125/55 (VDE & ENEC10, CQC)
  • Optional: 3/4HP 120/250VAC (cURus)
  • Optional: 10(2)A 250~T125/55 5E4 (VDE & ENEC10, CQC)
  • Optional: 20(8)A 250V~ T125/55 (VDE & ENEC10, CQC)
  • Optional: 25(8)A 250VAC T125/55 (CQC)
  • Optional: 8[128]A 250V T55 1E4 (cURus, ENEC15)
  • Optional: 30(8)A 125/250VAC T125/55 1E4 (cURus, ENEC15) 
  • Optional: 30A 48VDC T125/55 1E4 (cURus, ENEC15)
  • Optional: 20A 125VAC /16A 250VAC, 3/4HP 125/250VAC T105 (UL/CUL)

Three positions:

  • 16A 125/250VAC(cURus)
  • 16(4)A 250V~ T85/55 (VDE & ENEC10, CQC)
  • Initial contact resistance : 20m ohm max.
  • Insulation resistance : 100M ohm min, at 500VDC
  • Dielectric strength : 1,000 VAC(UL), 1500VAC(VDE)for 1 minute 
  • Electrical life: 6000(UL); 10000(VDE) cycles
  • Base : Nylon 66, UL rated : 94V-2 min
  • Actuator : Nylon 66 /PC, UL rated 94V-2 min 
  • Spring : Piano wire
  • Contacts : Silver alloy
  • Terminals : Silver plated copper
  • Lamp : Neon for AC
  • Round LED effect lighting available
  • SPST, SPDT
  • ON-OFF; ON-ON, ON-OFF-ON or momentary functions

@

How to order:

Quoted from Wekipedia:
 
~Inrush current, input surge current or switch-on surge is the maximum, instantaneous input current drawn by an electrical device when first turned on. For example, incandescent light bulbs have high inrush currents until their filaments warm up and their resistance increases. Alternating current electric motors and transformers may draw several times...... ~

Choosing a switch that can have a good capacity for your device is thus very important for your device's safety. Our RH series can offer an option up to 8A'L' , or 128A inrush that can be the appropriate switch to ensure your device's life and stability.



RH110-CRC-BBN-N



RH114-C5L-WRN-W



RH110-C5N-BRN-W


   
RH130-C6N-BBN-2W

Other extended types